Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM › 2012.02–2015.04
NM2030EQ _54 Brake _014303 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0072915 BRAKE CONTROL SYSTEM GE GENERAL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The following brake control functions are provided: Anti-lock Brake System (ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRC) and Vehicle Stability Control (VSC).



PRECAUTION


a.

When the brake control system is activated, the brake pedal could shudder. This is a normal occurrence of the system in operation and should not be considered a malfunction.


b.

The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression Ignition Switch
(Position)
Engine Switch
(Condition)
Ignition Switch off LOCK Off (Lock)
Ignition Switch ACC ACC On (ACC)
Ignition Switch ON ON On (IG)
Engine Start START On (Start)