FUNCTION
The Dual Variable Valve Timing-intelligent (VVT-i) system is designed to control the intake and exhaust camshafts within a range of 40° and 35° respectively (of crankshaft angle) to provide valve timing that is optimally suited to the engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy, and reducing exhaust emissions.
| *1 | Cam Timing Oil Control Valve Assembly (Bank 1 Exhaust Side) | *2 | Cam Timing Oil Control Valve Assembly (Bank 1 Intake Side) |
| *3 | Camshaft Position Sensor (Bank 1 Exhaust Side) | *4 | E. F. I. Engine Coolant Temperature Sensor |
| *5 | Cam Timing Oil Control Valve Assembly (Bank 2 Intake Side) | *6 | Camshaft Position Sensor (Bank 2 Exhaust Side) |
| *7 | Cam Timing Oil Control Valve Assembly (Bank 2 Exhaust Side) | *8 | Camshaft Position Sensor (Bank 2 Intake Side) |
| *9 | Crank Position Sensor | *10 | Camshaft Position Sensor (Bank 1 Intake Side) |
| *11 | ECM | *12 | Intake Mass Air Flow Meter Sub-assembly
- Throttle Position Sensor |
The dual VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below.
During Idling
| Objective | Effect |
|---|---|
| Eliminating overlap reduces blow back to the intake side. | ·
Stabilized idling rpm ·
Better fuel economy |
At Light Load
| Objective | Effect |
|---|---|
| Eliminating overlap reduces blow back to the intake side. | Engine stability is ensured |
At Medium Load
| Objective | Effect |
|---|---|
| Increasing overlap increases internal EGR, reducing pumping losses. | ·
Better fuel economy ·
Improved emission control |
In Low to Medium Speed Range with Heavy Load
| Objective | Effect |
|---|---|
| Advancing the intake valve closing timing improves volumetric efficiency. | Improved torque in low to medium speed range |
In High Speed Range with Heavy Load
| Objective | Effect |
|---|---|
| Retarding the intake valve closing timing improves volumetric efficiency. | Improved output |
At Low Temperatures
| Objective | Effect |
|---|---|
| Eliminating overlap reduces blow back to the intake side to stabilize the idle speed during fast idle. | ·
Stabilized fast idle rpm ·
Better fuel economy |
Starting the Engine/Stopping the Engine
| Objective | Effect |
|---|---|
| Eliminating overlap reduces blow back to the intake side. | Improved startability |