FUNCTION
The active control engine mount operates at idle, when the engine speed is less than 900 rpm. Signals that are synchronized to the engine speed are sent by the ECM to the VSV that controls the vacuum applied to the mount. This engine vacuum is utilized to vary the pressure of the intake air surge tank assembly in the active control engine mount. As a result, the diaphragm vibrates, and using the liquid in the mount as a medium, the vibration is transferred to the rubber mount. This vibration of the engine mount acts to cancel out engine vibration during idle, thus reducing vibration and noise at idle. The ability of the engine mount to generate vibration for use as a damping force is adjusted using the effects of the orifice and the side branch (vacuum hose branch).
| *1 | Engine | *2 | Active Control Engine Mount |
| *3 | VSV | *4 | Side Branch |
| *5 | Intake Air Surge Tank Assembly | *6 | Vacuum Tank |
| *7 | ECM | *8 | Rubber |
| *9 | Air Chamber | *10 | Main Liquid Chamber |
| *11 | Diaphragm | - | - |