Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › SFI SYSTEM
NM2030EQ _51 Engine / Hybrid System _014288 2GR-FE ENGINE CONTROL _0072899 SFI SYSTEM DE DETAILS F

2GR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  CAMSHAFT TIMING OIL CONTROL VALVE  


CONSTRUCTION


a.

The cam timing oil control valve assembly controls its spool valve using duty-cycle control from the ECM. This allows hydraulic pressure to be applied to the camshaft timing gear assembly or camshaft timing exhaust gear assembly advance or retard side. When the engine is stopped, the cam timing oil control valve assembly (intake) will move to the retard position, and the cam timing oil control valve assembly (exhaust) will move to the advance position.

W100053
1.417,1.615 1.688,1.615 1.688,1.615 2.406,1.979 true 1.115,1.917 1.969,1.917 true 1.073,3.198 1.552,3.198 1.552,3.198 2.104,2.156 true 4.99,3.344 4.698,3.344 4.698,3.344 4.104,2.344 true 5,2.948 4.771,2.948 4.771,2.948 4.177,2.073 true 2.948,1.479 3.073,0.594 3.073,0.594 4.292,0.594 true 2.604,1.479 2.5,0.594 2.5,0.594 1.417,0.594 true 2.708,2.615 2.875,2.76 0.167,0.146 10 *5 5.031,3.271 5.219,3.448 0.188,0.177 10 *8 5.031,2.896 5.604,3.073 0.573,0.177 10 *7 1.24,0.49 1.427,0.656 0.188,0.167 10 *a 4.333,0.51 4.542,0.688 0.208,0.177 10 *b 1.25,1.542 1.448,1.708 0.198,0.167 10 *6 0.948,1.844 1.125,2.021 0.177,0.177 10 *3 0.917,3.125 1.365,3.292 0.448,0.167 10 *2 2.385,2.604 2.573,2.771 0.188,0.167 10 *4 3.052,2.615 3.24,2.792 0.188,0.177 10 *4 0.198,0.083 0.385,0.25 0.188,0.167 10 *1
*1 Cam Timing Oil Control Valve Assembly (Intake) *2 Spring
*3 Sleeve *4 Drain
*5 Oil Pressure *6 Spool Valve
*7 Plunger *8 Coil
*a to Camshaft Timing Gear Assembly (VVT-i Controller) (Advance Side)* *b to Camshaft Timing Gear Assembly (VVT-i Controller) (Retard Side)*


*: On the cam timing oil control valve assembly (exhaust), the advance and retard sides are reversed.