Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › SFI SYSTEM
NM2030EQ _51 Engine / Hybrid System _014288 2GR-FE ENGINE CONTROL _0072899 SFI SYSTEM DE DETAILS F

2GR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  AIR INTAKE CONTROL  


OPERATION


a.

The intake control valve position is switched by the VSV depending on engine speed and throttle valve angle signals.


b.

When the engine is operating in the low to mid speed range, this control operates the air intake control valve to close one part of the air cleaner inlet assembly. As a result, the air enters the air filter box via the smaller port, allowing the intake air resonator sub-assembly to help reduce intake noise.


c.

When the engine is operating in the high-speed range, this control operates the air intake control valve to open both sides of the air cleaner inlet assembly. As a result, the intake area is maximized and the intake efficiency is improved.

W100061
3.281,1.24 3.094,1.24 3.094,1.24 2.99,1.594 true 1.781,3.021 2.198,3.021 2.198,3.021 2.615,2.281 true 4.385,2.771 4.115,2.771 4.115,2.771 3.49,2.083 true 2.521,0.552 2.854,0.698 0.333,0.146 10 ECM 4.281,0.49 5.771,1.021 1.49,0.531 10 Throttle Position Sensor Signal 4.375,2.281 6.385,2.583 2.01,0.302 10 Intake Air Surge Tank Assembly 3.313,1.156 4.219,1.375 0.906,0.219 10 Vacuum Tank 4.448,2.708 6.115,3.146 1.667,0.438 10 Air Cleaner Filter Element Sub-assembly 1.427,2.24 1.677,2.49 0.25,0.25 10 Air 1.427,2.594 1.677,2.844 0.25,0.25 10 Air 0.677,2.927 1.781,3.313 1.104,0.385 10 Air Intake Control Valve 2.094,1.635 2.438,1.875 0.344,0.24 10 VSV 1.042,0.521 1.99,0.875 0.948,0.354 10 Crank Position Sensor Signal 3.948,3.781 4.365,4.031 0.417,0.25 10 Open 4.135,5.271 4.5,5.521 0.365,0.25 10 High 2.729,5.271 3.052,5.458 0.323,0.188 10 Low 1.875,4.938 2.375,5.167 0.5,0.229 10 Narrow 2.01,3.469 2.406,3.646 0.396,0.177 10 Wide 1.25,4.135 2.146,4.333 0.896,0.198 10 Throttle Valve 3.115,5.5 4.104,5.74 0.99,0.24 10 Engine Speed 2.385,3.135 4.583,3.438 2.198,0.302 10 Air Intake Control Valve Condition