Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › ENGINE UNIT
NM2030EQ _51 Engine / Hybrid System _014289 2GR-FE ENGINE MECHANICAL _0072900 ENGINE UNIT DE DETAILS F

2GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD  


CONSTRUCTION


a.

Connecting rod sub-assemblies that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the connecting rod caps to minimize the shifting of the connecting rod caps during assembly.


c.

Nutless-type plastic region tightening bolts are used on the connecting rod sub-assemblies for a lighter design.


d.

Aluminum bearings are used for the connecting rod bearings.


e.

The connecting rod bearings are reduced in width to reduce friction.

W100011
4.01,2.552 4.292,1.75 4.292,1.75 4.542,1.75 true 4.01,3 4.01,3.458 true 3.25,3 3.25,3.458 true 4.583,1.677 4.771,1.865 0.188,0.188 10 *2 3.948,3.49 4.125,3.646 0.177,0.156 10 *1 3.188,3.49 3.365,3.646 0.177,0.156 10 *1
*1 Plastic Region Tightening Bolt *2 Knock Pin