Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › ENGINE UNIT
NM2030EQ _51 Engine / Hybrid System _014289 2GR-FE ENGINE MECHANICAL _0072900 ENGINE UNIT DE DETAILS F

2GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VALVE MECHANISM  


CONSTRUCTION


a.

Each cylinder of this engine has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased due to the larger total port areas.


b.

This engine uses roller rocker arms with built-in needle bearings. This reduces the friction that occurs between the cams and the roller rocker arms when the valves are pushed down, thus improving fuel economy.


c.

Valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.


d.

The intake camshafts are driven by the crankshaft via the primary timing chain. The exhaust camshafts are each driven by the intake camshaft of their respective bank via a secondary chain.


e.

This engine has the Dual Variable Valve Timing-intelligent (VVT-i) system which controls the intake camshafts and exhaust camshafts to provide optimal valve timing according to driving conditions. With this adoption, lower fuel consumption, higher engine performance, and fewer exhaust emissions have been achieved. For details, refer to the Dual VVT-i control.

W100679
2.625,2.479 3.26,4.167 3.26,4.167 3.479,4.167 true 3.229,2.219 3.948,3.781 3.948,3.781 4.271,3.781 true 4.75,3.115 5.271,3.115 true 4.885,2.615 5.396,2.615 true 5.583,2.365 5.875,2.833 5.875,2.833 6,2.833 true 6.125,1.667 6.448,1.844 6.448,1.844 6.448,2.375 true 5.385,1.104 5.479,1.104 5.479,1.104 5.781,1.667 true 2.375,1.188 2.667,0.135 2.667,0.135 2.813,0.135 true 3.49,0.708 3.302,0.708 3.302,0.708 2.969,1.771 true 1.49,2.635 0.688,4.323 0.688,4.323 0.969,4.323 true 1.677,1.552 2.49,4.385 2.49,4.385 2.688,4.385 true 5.292,1.563 5.51,1.563 5.51,1.563 5.677,1.833 true 6.094,1.26 6.094,0.469 6.094,0.469 6.25,0.469 true 0.771,0.365 0.979,0.365 0.979,0.365 1.438,1.344 true 0.604,0.292 0.833,0.49 0.229,0.198 10 false *1 3.521,4.052 3.75,4.25 0.229,0.198 10 false *1 2.854,0.031 3.083,0.229 0.229,0.198 10 false *2 3.542,0.615 3.771,0.813 0.229,0.198 10 false *3 6.292,0.406 6.521,0.604 0.229,0.198 10 false *4 5.229,1.031 5.458,1.229 0.229,0.198 10 false *5 5.115,1.479 5.344,1.677 0.229,0.198 10 false *6 4.688,2.49 4.917,2.688 0.229,0.198 10 false *7 6.375,2.417 6.604,2.615 0.229,0.198 10 false *8 4.563,3.01 4.792,3.208 0.229,0.198 10 false *9 6.042,2.771 6.302,2.99 0.26,0.219 10 false *10 1.031,4.208 1.292,4.427 0.26,0.219 10 false *12 2.729,4.271 2.99,4.49 0.26,0.219 10 false *13 4.302,3.688 4.563,3.906 0.26,0.219 10 false *11
*1 No. 2 Chain Sub-assembly (Secondary) *2 Camshaft (RH, Intake)
*3 No. 3 Camshaft Sub-assembly (LH, Intake) *4 No. 1 Valve Rocker Arm Sub-assembly
*5 Valve Spring Retainer *6 Compression Spring
*7 Valve Spring Seat *8 Valve Lash Adjuster Assembly
*9 Valve *10 Valve Guide Bush
*11 No. 4 Camshaft Sub-assembly (LH, Exhaust) *12 Chain Sub-assembly (Primary)
*13 No. 2 Camshaft (RH, Exhaust) - -


Valve Timing
Intake Valve Open -3° to 37° BTDC
Close 71° to 31° ABDC
Exhaust Valve Open 60° to 25° BBDC
Close 4° to 39° ATDC

W100017
3.01,0.469 2.927,0.469 2.927,0.469 2.885,0.635 true 2.417,0.479 2.656,0.479 2.656,0.479 2.833,0.625 true 4.156,0.385 3.688,0.385 3.688,0.385 3.229,0.833 true 4.177,2.969 3.865,2.969 3.865,2.969 3.531,2.76 true 1.479,2.865 1.75,2.865 1.75,2.865 1.938,2.729 true 1.563,0.292 1.875,0.292 1.875,0.292 2.427,0.844 true 1.375,0.208 1.563,0.385 0.188,0.177 10 *a 1.313,2.781 1.5,2.938 0.188,0.156 10 *a 4.76,1.271 5.01,1.458 0.25,0.188 10 *e 4.219,2.896 5.833,3.25 1.615,0.354 10 *b 4.219,0.313 4.5,0.521 0.281,0.208 10 *b 4.76,1.688 5.104,1.875 0.344,0.188 10 *f 2.708,0.333 2.896,0.5 0.188,0.167 10 *c 2.74,3.354 2.927,3.521 0.188,0.167 10 *d 3.99,2.49 4.344,2.635 0.354,0.146 10 60° 3.531,0.677 3.885,0.823 0.354,0.146 10 39° 3.083,0.396 3.323,0.542 0.24,0.146 10 4° 2.26,0.406 2.5,0.552 0.24,0.146 10 3° 1.875,0.729 2.229,0.875 0.354,0.146 10 37° 1.344,2.281 1.656,2.5 0.313,0.219 10 71° 2.01,3.021 2.323,3.24 0.313,0.219 10 31° 3.313,3.083 3.625,3.302 0.313,0.219 10 25°
*a Intake VVT-i Operation Range *b Exhaust VVT-i Operation Range
*c TDC *d BDC
*e Intake Valve Operation Angle *f Exhaust Valve Operation Angle