Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › ENGINE UNIT
NM2030EQ _51 Engine / Hybrid System _014289 2GR-FE ENGINE MECHANICAL _0072900 ENGINE UNIT DE DETAILS F

2GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CAMSHAFT TIMING EXHAUST GEAR  


CONSTRUCTION


a.

The camshaft timing exhaust gear assembly consists of an outer housing that is driven by the timing chain sprocket, and a vane sub-assembly that is coupled to each camshaft.


b.

The camshaft timing exhaust gear assembly uses a vane sub-assembly with 4 lobes.


c.

When the engine stops, the camshaft timing exhaust gear assembly is locked at the most advanced angle. This ensures excellent engine startability.


d.

The oil pressure sent from the advance or retard side passages of the exhaust camshafts causes rotation of the vane sub-assembly relative to the timing chain sprocket, varying the valve timing continuously.


e.

An advance assist spring is provided on the camshaft timing exhaust gear assembly. This helps to apply torque in the advance angle direction so that the vane lock pin securely engages with the housing when the engine stops.

W100020
3.927,2.719 3.76,2.719 3.76,2.719 3.427,1.969 true 5,2.406 4.802,2.406 4.802,2.406 4.521,1.865 true 5.302,1.323 5.302,1.771 true 2.385,2.396 2.385,2.74 true 5.229,1.802 5.427,2 0.198,0.198 10 *4 5.063,2.333 5.229,2.521 0.167,0.188 10 *3 3.979,2.656 4.198,2.833 0.219,0.177 10 *2 2.313,2.781 2.51,2.979 0.198,0.198 10 *1
*1 Outer Housing *2 Vane Sub-assembly [Coupled to Camshaft (Exhaust)]
*3 Timing Chain Sprocket *4 Camshaft (Exhaust)