CONSTRUCTION
TWCs are provided in the exhaust manifold sub-assembly of each bank and also in the front exhaust pipe assembly.
An exhaust manifold with an integrated TWC is used for warm-up of the TWC in the front exhaust pipe assembly.
An ultra thin-wall, high-cell density, ceramic type TWC is used for the exhaust manifold sub-assembly and a thin-wall, ceramic type TWC is used for the front exhaust pipe assembly.
The ultra thin-wall TWC enables improved exhaust emissions by optimizing the cell density and the wall thickness.
| *1 | Exhaust Manifold Sub-assembly RH (for Bank 1) | *2 | Exhaust Manifold Sub-assembly LH (for Bank 2) |
| *3 | TWC | *4 | Ultra Thin-wall |
| *5 | Front Exhaust Pipe Assembly | - | - |