Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › AUTOMATIC TRANSAXLE SYSTEM
NM2030EQ _52 Drivetrain _014297 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0072909 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  CENTRIFUGAL FLUID PRESSURE CANCELING MECHANISM  


CONSTRUCTION


a.

For the following reason, a centrifugal fluid pressure canceling mechanism is used on the C1 and C2 clutches.


b.

Clutch shifting operation is affected not only by the valve body controlling fluid pressure but also by centrifugal fluid pressure from the fluid that is present in the clutch piston oil pressure chamber (chamber A). The centrifugal fluid pressure canceling mechanism uses chamber B to reduce the effects of the centrifugal fluid pressure due to the fluid in chamber A. As a result, smooth shifting with excellent response is achieved.

X106203
1.729,1.979 1.354,1.979 true 2.281,2.531 2.281,2.76 true 1.885,1.844 1.292,1.292 true 1.833,1.948 1.156,1.49 true 1.896,2.229 1.542,2.74 true 2.198,2.417 1.927,2.792 true 1.135,1.188 1.365,1.354 0.229,0.167 10 *1 1.188,1.917 1.375,2.083 0.188,0.167 10 *2 1.438,2.76 1.625,2.927 0.188,0.167 10 *3 1,1.396 1.229,1.563 0.229,0.167 10 *1 2.229,2.781 2.417,2.948 0.188,0.167 10 *2 1.823,2.802 2.01,2.969 0.188,0.167 10 *3
*1 Chamber A *2 Chamber B
*3 Piston - -



c.

Chamber B is filled by fluid supplied to the shaft for lubrication. As a result of filling chamber B, there is the same amount of fluid pressure due to centrifugal force on both sides of the piston. This cancels the effect of fluid pressure on the piston due to centrifugal force. Accordingly, it is not necessary to discharge the fluid through the use of a check ball, and highly responsive and smooth shifting characteristics are achieved.

X100063
3.677,0.479 3.875,0.479 3.875,0.479 3.99,0.917 true 2.917,1.719 3.375,1.719 true 1.146,1.635 1.604,1.635 true 2,2.448 2.01,2.521 2.01,2.521 2.469,2.521 false 2.469,2.448 2.469,2.521 false 2.24,2.521 2.24,2.635 false 0.313,1.542 1.125,2.313 0.813,0.771 10 Chamber A (Piston Fluid Pressure Chamber) 3.406,1.635 4.677,2.156 1.271,0.521 10 Chamber B (Centrifugal Fluid Pressure Chamber) 5.042,1.99 6.75,2.333 1.708,0.344 10 : Centrifugal Fluid Pressure Applied to Chamber B 5.042,1.354 6.75,1.698 1.708,0.344 10 : Centrifugal Fluid Pressure Applied to Chamber A 5.052,0.708 6.5,0.896 1.448,0.188 10 : Target Fluid Pressure 3.208,0.385 3.625,0.552 0.417,0.167 10 Clutch 1.5,2.646 2.604,2.99 1.104,0.344 10 Fluid Pressure Applied to Piston 2.844,2.969 3.563,3.135 0.719,0.167 10 Shaft Side 0.625,3.833 2.01,4.167 1.385,0.333 10 Fluid pressure applied to piston 2.438,3.823 4.448,4.208 2.01,0.385 10 Centrifugal fluid pressure applied to chamber B 4.896,3.823 6.667,4.208 1.771,0.385 10 Target fluid pressure (original clutch pressure) 2.125,3.896 2.25,4.042 0.125,0.146 10 - 4.542,3.906 4.667,4.052 0.125,0.146 10 =