Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION SYSTEM › 2012.02–2015.04
NM2030EQ _53 Suspension _014300 FRONT SUSPENSION _0072912 FRONT SUSPENSION SYSTEM DE DETAILS F

FRONT SUSPENSION  FRONT SUSPENSION SYSTEM  DETAILS  SHOCK ABSORBER  


CONSTRUCTION


a.

In the front shock absorber assembly, a low-pressure N2 gas sealed type construction is used to suppress cavitations and a multi-leaf type linear control valve is also used to attain the linear damping force characteristics, offering both driving stability and ride comfort.

NOTICE:

To prevent hazardous conditions, make sure to empty the gas from the shock absorber before discarding an N2 gas sealed shock absorber. For details, refer to the Repair Manual.



b.

Since the multi-leaf type linear control valve has a laminate-structure backing valve, it enables the damping force to be generated at lower piston speeds, compared with a structure that generates the damping force with only the base valve when compression force is applied.

X105847
1.49,2.458 2.188,2.458 true 2.354,4.281 2.979,3.656 2.979,3.656 3.156,3.656 true 4.75,2.354 4.135,1.917 4.135,1.917 3.969,1.917 true 4.781,2.563 4.146,2.927 4.146,2.927 3.969,2.927 true 1.354,2.406 1.521,2.594 0.167,0.188 10 *1 3.188,3.573 3.406,3.771 0.219,0.198 10 *2 3.781,1.313 3.99,1.479 0.208,0.167 10 *3 3.792,1.833 4.01,2.031 0.219,0.198 10 *4 3.813,2.833 4.031,3.031 0.219,0.198 10 *5
*1 Low-pressure N2 Gas *2 Base Valve
*3 Multi-leaf Type Linear Control Valve *4 Backing Valve
*5 Inner Valve - -
V100135

Oil Flow
V100136

Compression Force



c.

The illustration below shows a comparison of multi-leaf type linear control valve and conventional valve damping force characteristics.

X104936
4.594,1.365 4.833,0.833 4.833,0.833 4.99,0.833 false 3.271,1.354 3.5,0.833 3.5,0.833 3.667,0.833 false 1.292,2.594 2.771,2.979 1.479,0.385 10 Tension Damping Force 1,3.042 2.813,3.354 1.813,0.313 10 Compression Damping Force 3.74,0.74 4.49,1.104 0.75,0.365 10 Low Speed 5.031,0.74 6.615,1.125 1.583,0.385 10 Medium and High Speed 0.104,0.094 2.469,0.51 2.365,0.417 12 Damping Force Characteristics: 0.906,0.438 3.24,0.781 2.333,0.344 10 : Multi-leaf Type Linear Control Valve 0.885,0.813 2.26,1.177 1.375,0.365 10 : Conventional Valve 5.51,2.802 6.438,3.177 0.927,0.375 10 Piston Speed