Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
NM2030EQ _59 Vehicle Exterior _014325 WIPER / WASHER _0072948 WIPER AND WASHER SYSTEM CO CONTROL F

WIPER / WASHER  WIPER AND WASHER SYSTEM  CONTROL  WASHER CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

Front Wiper System

i.

The front wiper system consists of the following parts:

Component Function
Wiper Switch (Windshield Wiper Switch Assembly)
·

Outputs the position signal of the wiper switch (windshield wiper switch assembly) to the windshield wiper motor assembly, windshield washer motor and pump assembly and windshield wiper relay assembly*.

·

Setting this switch to AUTO will cause the rain sensing function to operate. This switch is also used to adjust the rain sensing function sensitivity.*


Wiper Motor and Link Assembly Activates the front wiper in accordance with the position signal of the wiper switch (windshield wiper switch assembly) or the control signal from the windshield wiper relay assembly.
Windshield Washer Motor and Pump Assembly Activates in accordance with the signal from the front washer switch (windshield wiper switch assembly).
Rain Sensor* Senses rain when the wiper switch (windshield wiper switch assembly) is in AUTO, and sends signals to the windshield wiper relay assembly.
Windshield Wiper Relay Assembly* Receives the operation signal from the wiper switch (windshield wiper switch assembly) and the rain sensor, and inputs them into the windshield wiper motor assembly.
Combination Meter Assembly Outputs the vehicle speed signal to the windshield wiper relay assembly.*

*: Models with rain sensing function



b.

Headlight Cleaner System

i.

The headlight cleaner system has the following parts and functions:

Component Function
Headlight Cleaner Switch Assembly The user operates this switch to operate the headlight cleaner system.
Headlight Cleaner Control Relay Receives the signals from the headlight cleaner switch assembly, washer switch (windshield wiper switch assembly) and main body ECU (multiplex network body ECU), and controls the headlight cleaner motor and pump assembly.
Main Body ECU (Multiplex Network Body ECU) Sends the headlight low beam illumination signal to the headlight cleaner control relay.
Headlight Cleaner Motor and Pump Assembly The washer fluid pushes out the headlight washer actuator sub-assembly RH and LH.
Headlight Washer Actuator Sub-assembly RH/LH Sprays the washer fluid sent by the headlight cleaner motor and pump assembly onto the headlights.




SYSTEM CONTROL


a.

Headlight Cleaner System

i.

The headlight cleaner operates as follows:

Headlight Low Beam Headlight Low Beam Wiper Switch (Windshield Wiper Switch Assembly)
On On (First Time) On (Second Time or later)
Turn On Activated Activated Not Activated
Turn Off Not Activated Not Activated Not Activated




FUNCTION


a.

Rain Sensing Function

i.

The rain sensing function controls the wiping timing in accordance with the amount of raindrops when the wiper switch (windshield wiper switch assembly) is in the AUTO position.


ii.

This control is effected by the rain sensor based on the amount of raindrops and input signals from the windshield wiper relay assembly.


iii.

A luminance detection function is provided to automatically change the raindrop sensitivity according to day or night.



b.

Washer-linked Wiper Function

i.

When the wiper switch (windshield wiper switch assembly) is in the off or AUTO position and the washer switch (windshield wiper switch assembly) is turned on for approximately 0.5 seconds or more, the wipers start on LO at the same time as the washer fluid is sprayed.

Y102268
3.844,0.406 3.604,0.406 3.604,0.406 3.5,0.677 true 4.5,3.479 4.229,3.479 4.229,3.479 4.135,3.156 true 0.219,0.052 1.469,0.417 1.25,0.365 12 false Timing Chart: 4.521,0.875 6.375,1.292 1.854,0.417 10 false Approximately 0.5 Seconds 3.906,0.281 5.76,0.698 1.854,0.417 10 false Washer Switch on Time 4.552,3.385 6.406,3.802 1.854,0.417 10 false Additional Wiper Operation 0.24,1.031 2,1.677 1.76,0.646 10 false Washer Switch (Windshield Wiper Switch Assembly) 0.281,2.49 1.833,3.063 1.552,0.573 10 false Windshield Wiper Motor Assembly 0.26,1.698 1.948,2.094 1.688,0.396 10 false Washer-linked Operation 2.135,1.021 2.469,1.302 0.333,0.281 10 false On 2.135,1.396 2.469,1.677 0.333,0.281 10 false Off 2.135,1.677 2.469,1.958 0.333,0.281 10 false On 2.135,2.083 2.469,2.365 0.333,0.281 10 false Off 2.135,2.458 2.469,2.74 0.333,0.281 10 false On 2.135,2.833 2.469,3.115 0.333,0.281 10 false Off



c.

Headlight Cleaner System

i.

When the ignition switch is ON , pressing the headlight cleaner switch assembly will cause the headlight cleaner motor and pump assembly to operate for a predetermined length of time.


ii.

When the ignition switch is ON and the headlights are turned to low beam, pressing the washer switch (windshield wiper switch assembly) once will cause the headlight cleaner motor and pump assembly to operate.




FAIL-SAFE


a.

If the windshield wiper relay assembly detects a malfunction of the rain sensor during the operation of the rain sensing function, the following controls will be performed:

1.

Continuously performs wiper operation prior to the occurrence of a malfunction.

2.

Switches to intermittent operation if a malfunction of the rain sensor is detected when the ignition switch is turned from off to ON or the wiper switch (windshield wiper switch assembly) is in the AUTO position.