Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BODY STRUCTURE
NM2030EQ _59 Vehicle Exterior _014327 EXTERIOR PANELS / TRIM _0072950 BODY STRUCTURE DE DETAILS F

EXTERIOR PANELS / TRIM  BODY STRUCTURE  DETAILS  AERODYNAMICS  


FUNCTION


a.

An aero stabilizing fin is provided on the outer rear view mirror base for enhanced aerodynamics.

i.

After passing the aero stabilizing fin, the air speed will increase and vortex flow will be generated.


ii.

This vortex flow increases the speed of surrounding air while at the same time pulling the airflow towards the vehicle body.


iii.

The airflow with higher speed passes near both sides of the vehicle body and ends at the rear of the vehicle. This helps to hold the vehicle body, thus stabilizing the vehicle.

Y112064
2.344,5.083 2.146,5.083 2.146,5.083 1.844,4.781 true 4.448,5.073 4.25,5.073 4.25,5.073 4.01,4.885 true 2.875,1.177 2.76,1.177 2.76,1.177 2.49,1.458 true 2.406,4.99 2.656,5.135 0.25,0.146 10 *a 2.938,1.104 3.188,1.25 0.25,0.146 10 *a 4.49,4.99 4.74,5.135 0.25,0.146 10 *b
*a Aero Stabilizing Fin *b Vortex
V100135

Airflow
V100136

Hold the Vehicle from Both Sides




b.

Various types of airflow routing parts are provided under the floor to control airflow. In addition, an undercover is provided to make the under floor area flat in order to ensure excellent aerodynamic performance.


c.

A fin-shaped engine under cover and rear under cover have been adopted to achieve higher diffuser efficiency, thereby ensuring stability.

Y120366
0.865,2.5 0.948,2.615 0.083,0.115 10 false .
V100144

Undercover Area - -