OUTLINE
An optitron type combination meter assembly, which has a color multi-information display, is provided.
The combination meter assembly has a built-in meter ECU and buzzer.
| *a | Rheostat Switch | *b | Multi-information Display |
| *c | ODO/TRIP Switch | *d | The illustration shown is an example only. |
MAIN FEATURES
Opening/Ending Ceremony
An opening/ending ceremony which allows for anticipation of a pleasant drive is used. The ceremony operates as follows:
When the engine switch is turned on (IG), the needles, gauges and panels of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge and the multi-information display illuminate.
When the engine switch is turned off, all the illuminations fade out. During this period, the multi-information display shows the Eco Drive Level for 3 seconds.
| *a | IG ON | *b | IG OFF |
| *c | The illustrations shown are examples only. | - | - |
Multi-information Display
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
|---|---|
|
*1: Models with lane departure alert system *2: Models with navigation system |
|
| Shift Position Indicator | The current shift position is displayed. |
| Outside Temperature | ·
The outside temperature is displayed. ·
When the outside temperature drops below 3°C (37°F), an ice warning illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning flashes 10 times, the warning stays on. When the temperature reaches 5°C (41°F), the warning goes off. |
| Indicator | When the display conditions are met, the following indicators illuminate.
·
Cruise Control Indicator ·
Cruise SET Indicator ·
Lane Departure Alert Indicator*1 |
| Information | The following information can be displayed on the multi-information display by switching the tabs.
·
Drive Information ·
Navigation Information*2 ·
Cruise Control System/Lane Departure Alert System*1 Information ·
Warning Message ·
Settings
|
| ODO/TRIP Meter | ·
The odometer, trip meter A or trip meter B are displayed. ·
The item shown can be switched by pressing the ODO/TRIP switch. |
| Warning Message | A warning display will interrupt the current display on the multi-information display immediately when a warning is necessary. |
| Light Control Rheostat | Meter panel luminance can be changed by using the rheostat switch. |
The drive information shows the following information.
| Item | Outline |
|---|---|
| Drive Information | ·
The items selected on the setting screen can be displayed. 2 items can be selected in drive information 3 among the following: ·
Total Average Vehicle Speed between Reset Operations ·
Average Vehicle Speed after Engine Start-up ·
Total Elapsed Time between Reset Operations ·
Elapsed Time after Engine Start-up ·
Cruising Range ·
Cruising Range after Engine Start-up ·
Total Cruising Range between Reset Operations ·
Blank ·
In addition to the above functions, the following items can be displayed. ·
Drive Information 1 (Current Fuel Consumption and Total Average Fuel Consumption between Reset Operations) ·
Drive Information 2 (Eco Drive Level) ·
Blank
|
When navigation information is being displayed, current navigation information (turn-by-turn, straight guidance or direction meter) can be displayed. (Models with navigation system)