Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.04
NM2030EQ _58 Vehicle Interior _014317 METER / GAUGE / DISPLAY _0072938 METER / GAUGE SYSTEM DE DETAILS F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  DETAILS  COMBINATION METER  


FUNCTION


a.

Combination Meter Assembly

i.

Buzzer Function

1.

The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.


*1: Models for G.C.C. countries

*2: Models for Australia

*3: Models with lane departure alert system

1 Driver Side Seat Belt Warning (5 Times at the Maximum)*1 2 Driver Side Seat Belt Warning (Once)*1
3 Front Passenger Side Seat Belt Warning (Once)*1 4 Seat Belt Warning (Level 2)
5 Seat Belt Warning (Level 1)*1 6 Rear Passenger Side Seat Belt Warning*2
7 Seat Belt Warning (Level 1)*2 8 EPS Warning
9 Lane Departure Alert Warning*3 10 Smart Entry and System Warning (Continuous)
11 Smart Entry and start System Warning (Intermittent) 12 Smart Entry and Start System Warning (Continuous, 9 Times at the Maximum)
13 Smart Entry and Start System Warning (Once) 14 Multi-information System Warning
15 Immobiliser Certification Reminder 16 Speed Warning*1
17 Parking Brake Engaged Warning 18 Door Open while Driving Warning
19 Sport Shift Reject Warning 20 Turn Signal/Hazard Warning Operation



b.

Multi-information Display

i.

Display Function Flow

1.

The multi-information display can be switched as shown in the flow chart below:

Y179799E02
0.573,0.49 1.917,0.667 1.344,0.177 10 false Warning Display*c 2.906,0.615 5.51,0.813 2.604,0.198 10 false OFF 4.844,0.5 6.729,0.74 1.885,0.24 10 false Door Unlock Mode Display 3.979,0.177 4.26,0.385 0.281,0.208 10 false *a 3.979,0.75 4.219,0.948 0.24,0.198 10 false *a 3.979,0.5 4.219,0.698 0.24,0.198 10 false *b 2.167,0.656 2.406,0.854 0.24,0.198 10 false *a 2.167,0.427 2.406,0.625 0.24,0.198 10 false *b 3.698,1.281 6.042,1.531 2.344,0.25 10 false Engine Switch off to on (ACC) or (IG) 3.333,1.958 3.969,2.229 0.635,0.271 10 false Opening 3.667,2.365 3.906,2.563 0.24,0.198 10 false *e 0.323,3.375 1.469,3.76 1.146,0.385 10 false Diagnostic Trouble Code 2.948,3.042 4.865,3.365 1.917,0.323 10 false Information Display*d 2.5,3.333 4.417,3.656 1.917,0.323 10 false 1. Driver Information Tab 2.5,3.75 4.417,4.073 1.917,0.323 10 false 2. Navigation Information Tab*1 2.51,4.167 4.781,4.75 2.271,0.583 10 false 3. Cruise Control System / Lane Departure Alert System*2 Information Tab 2.5,5.26 4.417,5.583 1.917,0.323 10 false 4. Warning Message Tab 2.5,5.677 4.417,6 1.917,0.323 10 false 5. Setting Tab 0.406,5.417 2.323,5.74 1.917,0.323 10 false Interrupt Display 5.615,3.51 6.792,3.938 1.177,0.427 10 false Warning Display*c 1.792,3.74 2.031,3.938 0.24,0.198 10 false *a 5.125,3.729 5.365,3.927 0.24,0.198 10 false *a 1.802,5.635 2.042,5.833 0.24,0.198 10 false *a 5.125,5.51 5.365,5.708 0.24,0.198 10 false *a 1.698,3.271 1.938,3.469 0.24,0.198 10 false *b 5.208,3.271 5.448,3.469 0.24,0.198 10 false *b 5.208,5.042 5.448,5.24 0.24,0.198 10 false *b 1.729,5.167 1.969,5.365 0.24,0.198 10 false *b 5.688,5.125 6.74,5.813 1.052,0.688 10 false Lane Departure Alert Display*2 3.646,6.792 5.563,7.115 1.917,0.323 10 false Engine Switch on (IG) to off 2.563,7.229 4.729,7.552 2.167,0.323 10 false Eco Drive Level (Ending) Display*f 0.51,7.229 1.771,7.552 1.26,0.323 10 false Warning Display*c 2.177,7.167 2.417,7.365 0.24,0.198 10 false *a 1.698,7.958 1.938,8.156 0.24,0.198 10 false *b 3.448,8.021 4.708,8.344 1.26,0.323 10 false OFF 0.167,8.5 2.49,8.76 2.323,0.26 10 false *1: Models with Navigation System 2.917,8.5 6.313,8.75 3.396,0.25 10 false *2: Models with Lane Departure Alert System

No. Display Change Condition
*a Conditions are met.
*b Conditions are not met.
*c If there are multiple display requests, items will be displayed in sequence.
*d An item or display is selected by operating the steering pad switch assembly.
*e After engine switch on (IG).
*f The Eco Drive Level (ending) display is displayed for a certain period of time after the engine switch is turned off.



ii.

Information Display Tab Operation

·

The information currently displayed can be switched using the RIGHT (PAGE) switch of the steering pad switch assembly.

Y179800C01
1.208,4.5 1.208,3.938 true 2.625,4.5 2.625,3.844 true 0.469,3.292 0.781,3.448 0.313,0.156 10 false *A 0.406,3.073 0.719,3.229 0.313,0.156 10 false *1 1.135,4.521 1.448,4.677 0.313,0.156 10 false *2 3.802,0.208 4.115,0.365 0.313,0.156 10 false *3 5.708,0.208 6.219,0.406 0.51,0.198 10 false *4 (*C) 5.698,2.063 6.01,2.219 0.313,0.156 10 false *5 5.708,3.896 6.021,4.052 0.313,0.156 10 false *6 3.802,3.896 4.115,4.052 0.313,0.156 10 false *7 0.094,5.573 0.406,5.729 0.313,0.156 10 false *a 1.865,3.292 2.177,3.448 0.313,0.156 10 false *B 2.552,4.521 2.865,4.677 0.313,0.156 10 false *2
*A Models with 4 Spoke Steering Wheel *B Models with 3 Spoke Steering Wheel
*C Models with Navigation System - -
*1 Steering Pad Switch Assembly *2 RIGHT (PAGE) Switch
*3 Drive Information *4 Navigation Information
*5 Cruise Control System / Lane Departure Alert System Information *6 Warning Message
*7 Settings - -
*a The illustrations shown are examples only. - -
V100136

RIGHT (PAGE) switch operation - -




iii.

Drive Information Mode Function

·

The drive information tab shows vehicle information such as drivable range and fuel consumption.

·

The drive information display can be changed by using the UP/DOWN switch of the steering pad switch assembly.

Y179801C01
1.146,3.25 1.156,2.885 1.156,2.885 1.448,2.885 true 2.583,3.188 2.594,2.865 2.594,2.865 2.792,2.865 true 2.583,3.479 2.583,4.042 2.583,4.042 2.771,4.042 true 1.146,3.594 1.146,4.073 1.146,4.073 1.333,4.073 true 0.531,2.563 0.844,2.719 0.313,0.156 10 false *1 1.5,2.802 1.813,2.958 0.313,0.156 10 false *2 1.365,4 1.677,4.156 0.313,0.156 10 false *3 3.76,0.49 4.073,0.646 0.313,0.156 10 false *4 5.667,0.5 5.979,0.656 0.313,0.156 10 false *5 5.667,2.813 5.979,2.969 0.313,0.156 10 false *6 3.76,2.813 4.073,2.969 0.313,0.156 10 false *7 0.052,4.542 0.365,4.698 0.313,0.156 10 false *a 2.823,2.781 3.135,2.938 0.313,0.156 10 false *2 2.813,3.969 3.125,4.125 0.313,0.156 10 false *3 0.563,2.781 0.875,2.938 0.313,0.156 10 false *A 1.969,2.792 2.281,2.948 0.313,0.156 10 false *B
*A Models with 4 Spoke Steering Wheel *B Models with 3 Spoke Steering Wheel
*1 Steering Pad Switch Assembly *2 UP Switch
*3 DOWN Switch *4 Drive Information 1
*5 Drive Information 2 *6 Drive Information 3
*7 Blank - -
*a The illustrations shown are examples only. - -
V100136

DOWN switch operation
V100135

UP switch operation




iv.

Setting Function

·

The items displayed on the multi-information display can be customized.

·

The following items can be selected on the information setting screen.

Item Available Setting

*: Models with navigation system

Language The language used on the multi-information display can be selected:
·

English (Default)

·

French

·

Spanish


Unit The unit displayed on the multi-information display can be selected:
·

km (L/100 km) (Default)

·

km (km/L)


Drive Information 3 2 items can be selected among the following:
·

Total Average Vehicle Speed between Reset Operations (Default of lower area)

·

Average Vehicle Speed after Engine Start-up

·

Total Elapsed Time between Reset Operations

·

Elapsed Time after Engine Start-up

·

Cruising Range (Default of upper area)

·

Cruising Range after Engine Start-up

·

Total Cruising Range between Reset Operations

·

Blank


ECO Driving Indicator Light The ECO Driving Indicator Light can be switched:
·

ON (Default)

·

OFF


Interruption Display The following displays that appear as soon as the set conditions are met can be switched to ON (default) or OFF:
·

Turn-by-turn Navigation Display*

·

Incoming Telephone Display

·

Rheostat


Accent Color The accent color can be changed:
·

Clear Blue (Default)

·

Clear Turquoise

·

Deep Orange

·

Radiant Orange


Initialization The set items can be initialized.



v.

Warning Mode Function

·

When a warning is necessary, the warning display interrupts the current display on the multi-information display.

·

The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

Priority Display Master Warning Light Buzzer

*1: Models with lane departure alert system

*2: If the vehicle has reached a speed of 5 km/h (3 mph)

*3: Models with TOYOTA parking assist-sensor system

*4: Models for G.C.C. countries

*5: Models with blind spot monitor system

*6: Models with sliding roof system

*7: Models with automatic high beam system, LED headlights or automatic headlight beam level control system

1 Adjusting LDA Camera*1 - -
2 Lane departure alert warning reminder indicator (image display)*1 - -
3 Door open (while driving) (image display)*2 Blinks Sounds
Door open (image display) - -
Clearance sonar detection (image display)*3 - -
Check Park Sonar System*3 Illuminates -
Clean Park Sonar*3 Illuminates -
4 Auto Power OFF to Conserve Battery - -
5 Release Parking Brake Blinks Sounds
Key not detected Blinks Sounds
6 Speed Limit Exceeded*4 Blinks Sounds
7 Charging System Malfunction
See Owner's Manual
- -
LDA not available*1 Illuminates Sounds
Check Entry & Start System Blinks Sounds
BSM not available*5 Illuminates Sounds
Check Cruise Control System Illuminates Sounds
Check BSM System*5 Illuminates Sounds
Check LDA System*1 Illuminates Sounds
Engine Oil Pressure Low Illuminates Sounds
LDA System is Unavailable Below Approx. 50 km/h.*1 - -
LDA System is Unavailable at this Speed*1 - -
8 Lane departure alert indicator (image display)*1 - -
Turn Power OFF Blinks Sounds
Key detected in vehicle Blinks Sounds
Moon Roof opened*6 Blinks Sounds
Depress brake pedal, touch engine switch with key Blinks Sounds
Depress brake pedal and push engine switch to start Blinks Sounds
Shift to P position to start Blinks Sounds
9 Steering Lock active Blinks Sounds
10 Key Battery Low Illuminates Sounds
Check Headlight System*7 Illuminates Sounds
11 Fuel Low - -
TRC OFF - -
Power ON - -
Depress brake pedal and push engine switch to start - -





OPERATION


a.

Eco Driving Indicator Light Operation

i.

Eco Driving Indicator Light can operate when all of the following conditions are met:

·

The ignition switch is ON and the engine is running.

·

The vehicle is being driven with the shift lever in D.

·

Temporary S mode is not selected.

·

The vehicle is at a speed of 130 km/h (81 mph) or below.




b.

Eco Drive Level (Models with Multi-information Display)

i.

The eco drive level changes among 5 levels to indicate the average fuel consumption and current fuel consumption.


ii.

After the engine switch is turned off, the eco drive level display appears for 3 seconds in the multi-information display. When the average fuel consumption is 7.7 L/100 km or less or 13 km/L or higher, the "EXCELLENT!" message flashes.

Unit: L/100 km
Average Fuel Consumption Level Multi-information Display
Level 0
(15 L/100 km or higher)
Y150839

Level 1
(15 to 13 L/100 km)
Y150840

Level 2
(13 to 11 L/100 km)
Y150841

Level 3
(11 to 9 L/100 km)
Y150842

Level 4
(9 to 7 L/100 km)
Y150843

Level 5
(7 L/100 km or less)
Y150844

EXCELLENT!
(7.7 L/100 km or less)
Y150845


Unit: km/L
Average Fuel Consumption Level Multi-information Display
Level 0
(5 km/L or less)
Y150846

Level 1
(5 to 7.5 km/L)
Y150847

Level 2
(7.5 to 10 km/L)
Y150848

Level 3
(10 to 12.5 km/L)
Y150849

Level 4
(12.5 to 15 km/L)
Y150850

Level 5
(15 km/L or higher)
Y150851

EXCELLENT!
(13 km/L or higher)
Y150852