FUNCTION OF MAIN COMPONENTS
| Component | Function | |
|---|---|---|
| Main Body ECU (Multiplex Network Body ECU) | Receives various signal, and turns off the exterior lights. | |
| Certification ECU (Smart Key ECU Assembly) | ·
Receives the engine switch operation signal, outputs an ignition signal and transmits it to the main body ECU (multiplex network body ECU). ·
Judges and certifies the ID code sent from the door control receiver. |
|
| Headlight Dimmer Relay | Shuts down power to the low beams. | |
| Engine Room Junction Block Assembly | Shuts down power to the high beams and front fog lights. | |
| Instrument Panel Junction Block Assembly
- Taillight Relay |
Shuts down power to the taillights, parking lights and license plate lights. | |
| Headlight Dimmer Switch Assembly | Light Control Switch | Outputs a light control signal and transmits it to the main body ECU (multiplex network body ECU). |
| Front Door Courtesy Light Switch Assembly (LH, RH) | Detects whether a door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU). | |
| Rear Door Courtesy Light Switch Assembly (LH, RH) | ||
| Luggage Compartment Door Courtesy Light Switch Assembly | ||
| Front Door Lock with Motor Assembly (LH, RH)
- Door Unlock Detection Switch |
Detects whether a door is locked or unlocked and transmits a signal to the main body ECU (multiplex network body ECU). | |
| Rear Door Lock with Motor Assembly (LH, RH)
- Door Unlock Detection Switch |
||
| Door Control Receiver | Receives the ID code from the door control transmitter in the actuation area and transmits it to the main body ECU (multiplex network body ECU) via the certification ECU (smart key ECU assembly). | |
SYSTEM CONTROL
The light automatic turn-off system operates as follows:
| Function | Operation Condition |
|---|---|
| Driver Door-linked | When all of the following conditions are met, the exterior lights automatically turn off:
·
The engine switch is turned to ACC or off. ·
The driver door is opened. |