Home › General › SPECIFICATIONS › 2GR-FE ENGINE CONTROL
RM2030EQ _V1 General _014632 SPECIFICATIONS _0074341 2GR-FE ENGINE CONTROL F

SPECIFICATIONS  2GR-FE ENGINE CONTROL  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf in.*lbf
Camshaft timing oil control valve assembly x Cylinder head cover sub-assembly 10 102 7
Wire harness bracket x Cylinder head cover sub-assembly 8.0 82 71
Throttle body assembly x Intake air surge tank 10 102 7
Vacuum switching valve x Bracket 4.0 41 35
Transverse engine mounting bracket x Front engine mounting insulator assembly 87 887 64
Transverse engine mounting bracket x Engine assembly 64 653 47
Front engine mounting insulator assembly x Sub-frame 52 530 38
ECM bracket x Body 12 122 9
ECM bracket x ECM 3.0 31 27
Accelerator pedal sensor assembly x Body 5.4 55 48
VVT sensor x Cylinder head cover sub-assembly 10 102 7
Crank position sensor x Cylinder block sub-assembly 10 102 7
Spark plug assembly x Cylinder head sub-assembly 18 184 13
Ignition coil assembly x Cylinder head cover 10 102 7
Wire harness bracket x Cylinder head cover sub-assembly 8.0 82 71
Engine coolant temperature sensor x Cylinder head sub-assembly 20 204 15
Knock control sensor x Cylinder block sub-assembly 20 204 15
Air fuel ratio sensor x Exhaust manifold with SST 40 408 30
without SST 44 449 32
Heated oxygen sensor x Exhaust pipe with SST 40 408 30
without SST 44 449 32