Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › THROTTLE BODY
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074396 THROTTLE BODY G

2GR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE BODY

a.
A192503
2.208,2.104 1.594,2.5 true 2.646,2.125 2.844,2.542 true 1.375,2.469 1.625,2.729 0.25,0.26 10 M+ 2.885,2.552 3.135,2.813 0.25,0.26 10 M- 0.563,0.688 0.75,0.875 0.188,0.188 10 *a
*a Component without harness connected
(Throttle body)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle body.