Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › MASS AIR FLOW METER
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074400 MASS AIR FLOW METER A

2GR-FE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

a.

Install the mass air flow meter with the 2 screws.

NOTICE:

Make sure that the O-ring is not cracked or moved out of place during installation.


HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2GR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION



b.

Connect the mass air flow meter connector.