Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074402 CRANKSHAFT POSITION SENSOR A

2GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11401G 1.INSTALL CRANK POSITION SENSOR

a.
A191152
1.865,1.427 1.104,1.698 false 0.938,1.635 1.385,1.969 0.448,0.333 10 *1
*1 O-ring


Apply a light coat of engine oil to the O-ring on the crank position sensor.


b.

Install the crank position sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the crank position sensor connector.


Hide 2.INSTALL COMPRESSOR AND MAGNETIC CLUTCH

a.

Install the compressor and magnetic clutch.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>COMPRESSOR>INSTALLATION