Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › CRANKSHAFT POSITION SENSOR
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074402 CRANKSHAFT POSITION SENSOR G

2GR-FE ENGINE CONTROL  CRANKSHAFT POSITION SENSOR  INSPECTION  


PROCEDURE

Hide 11401G 1.INSPECT CRANK POSITION SENSOR

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Temperature Specified Condition
Cold 1630 to 2740 Ω
Hot 2065 to 3225 Ω


HINT:

"Cold" and "Hot" mean the temperature of the coils themselves. "Cold" is from -10 to 50°C (14 to 122 °F) and "Hot" is from 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the crank position sensor.