Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › KNOCK SENSOR
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074405 KNOCK SENSOR G

2GR-FE ENGINE CONTROL  KNOCK SENSOR  INSPECTION  


PROCEDURE

Hide 89615 1.INSPECT KNOCK CONTROL SENSOR

a.
A294030
1.208,0.073 1.521,0.229 0.313,0.156 10 *a
*a Component without harness connected
(Knock Control Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (Ground) - 2 (Output) 20°C (68°F) 120 to 280 kΩ


If the result is not as specified, replace the knock control sensor.