Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074406 AIR FUEL RATIO SENSOR G

2GR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1)

a.
A183494
2.031,1.198 2.667,0.948 false 1.406,1.156 0.583,0.906 false 1.406,1.625 0.583,1.719 false 2.719,0.854 3.156,1.135 0.438,0.281 10 HA1A 0.354,0.813 0.563,1.083 0.208,0.271 10 +B 0.208,1.635 0.542,1.896 0.333,0.26 10 A1A- 0.115,0.094 0.417,0.448 0.302,0.354 10 *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) - 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.


Hide 89467B 2.INSPECT AIR FUEL RATIO SENSOR (for Bank 2)

a.
A183494
2.031,1.177 2.667,0.927 false 1.385,1.188 0.563,0.938 false 1.406,1.604 0.583,1.698 false 2.729,0.823 3.167,1.104 0.438,0.281 10 HA2A 0.333,0.844 0.542,1.115 0.208,0.271 10 +B 0.198,1.625 0.552,1.885 0.354,0.26 10 A2A- 0.083,0.083 0.385,0.438 0.302,0.354 10 *a
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA2A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA2A) - 4 (A2A-) - 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.