Home › Engine / Hybrid System › 2GR-FE ENGINE CONTROL › INTEGRATION RELAY
RM2030EQ _51 Engine / Hybrid System _014634 2GR-FE ENGINE CONTROL _0074408 INTEGRATION RELAY A

2GR-FE ENGINE CONTROL  INTEGRATION RELAY  REMOVAL  


PROCEDURE

Hide 82662A 1.REMOVE NO. 1 RELAY BLOCK COVER

Hide 82641 2.REMOVE NO. 1 INTEGRATION RELAY

a.
A254789

Disconnect the connector.


b.
A254790

Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the No. 1 integration relay.


c.
A254791

Disconnect the 4 connectors and remove the No. 1 integration relay.