Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › DRIVE BELT
RM2030EQ _51 Engine / Hybrid System _014635 2GR-FE ENGINE MECHANICAL _0074411 DRIVE BELT A

2GR-FE ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 53851Z 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)

Hide 51441C 3.REMOVE ENGINE UNDER COVER RH

Hide 53736 4.REMOVE FRONT FENDER APRON SEAL RH

Hide 16361A 5.REMOVE V-RIBBED BELT

a.
A205850

Release the V-ribbed belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V-ribbed belt from the V-ribbed belt tensioner.


b.

While turning the V-ribbed belt tensioner counterclockwise, align its holes, and then insert a 5 mm hexagon wrench into the holes to fix the V-ribbed belt tensioner.