Home › Engine / Hybrid System › 2GR-FE COOLING › COOLING FAN SYSTEM
RM2030EQ _51 Engine / Hybrid System _014639 2GR-FE COOLING _0074440 COOLING FAN SYSTEM G

2GR-FE COOLING  COOLING FAN SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT COOLING FAN SYSTEM

a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the tester on.


d.

Enter the following menus: Powertrain / Engine / Active Test / Control the Electric Cooling Fan.

Powertrain > Engine > Active Test
Tester Display
Control the Electric Cooling Fan
50004 234 16

e.

Check the operation of the cooling fans while operating them using the tester.

If the cooling fan motor does not operate, check the cooling fan circuit (See page Engine / Hybrid System>2GR-FE COOLING>COOLING FAN SYSTEM>Cooling Fan Circuit).