Home › Engine / Hybrid System › 2GR-FE COOLING › THERMOSTAT
RM2030EQ _51 Engine / Hybrid System _014639 2GR-FE COOLING _0074444 THERMOSTAT G

2GR-FE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:
P013560

The valve opening temperature is inscribed on the thermostat.


a.
P000436

Immerse the thermostat in water, and then gradually heat the water.


b.

Check that the valve of the thermostat opens at the specified temperature.

Valve opening temperature:

80 to 84°C (176 to 183°F)


If the valve does not open as specified, replace the thermostat.


c.
A091387
2.135,1.552 2.313,1.719 0.177,0.167 10 *a
*a Valve Lift


Check the valve lift.

Valve lift:

7.7 mm (0.3031 in.) or more at 95°C (203°F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve is fully closed when the thermostat is at low temperatures (below 40°C (104°F)).

If it is not fully closed, replace the thermostat.