Home › Engine / Hybrid System › 2GR-FE COOLING › RELAY
RM2030EQ _51 Engine / Hybrid System _014639 2GR-FE COOLING _0074448 RELAY G

2GR-FE COOLING  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85927 1.INSPECT FAN RELAY

a.
A260082

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Apply battery voltage between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.