Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › ATF TEMPERATURE SENSOR
RM2030EQ _52 Drivetrain _014643 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0074464 ATF TEMPERATURE SENSOR G

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  ATF TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 82125J 1.INSPECT ATF TEMPERATURE SENSOR ASSEMBLY

a.
C133224
1.875,1.167 1.573,2.031 false 2.01,1.167 2.375,2.021 false 2.188,2.052 2.583,2.208 0.396,0.156 10 THO1 1.458,2.063 1.698,2.219 0.24,0.156 10 E2

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
THO1 - E2 10°C (50°F) 5 to 8 kΩ
THO1 - E2 25°C (77°F) 2.5 to 4.5 kΩ
THO1 - E2 110°C (230°F) 0.22 to 0.28 kΩ
THO1 - Body ground Always 10 kΩ or higher


If the resistance is out of the specified range with the ATF temperature shown in the preceding table, replace the ATF temperature sensor assembly. Otherwise, the driveability of the vehicle may decrease.