Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM2030EQ _52 Drivetrain _014643 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0074468 SHIFT LEVER A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  DISASSEMBLY  


PROCEDURE

Hide 35974 1.REMOVE LOWER POSITION INDICATOR HOUSING

a.
C239455

Disengage the 5 claws and remove the lower position indicator housing.


Hide 33563 2.REMOVE SHIFT LOCK RELEASE BUTTON (Lower Shift Lever Assembly Side)

a.
C239456

Disengage the 2 claws and remove the shift lock release button and shift lock release spring.


Hide 35978 3.REMOVE SHIFT POSITION INDICATOR

a.
C239457

Remove the 4 screws and shift position indicator from the rear console upper panel sub-assembly.


Hide 33563 4.REMOVE SHIFT LOCK RELEASE BUTTON (Shift Position Indicator Side)

a.
C240493

Disengage the 2 claws and remove the position indicator plate.


b.
C240494

Disengage the claw and remove the shift lock release button and shift lock release spring.


Hide 35906 5.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
C239460

Separate the bulb socket, 2 guides and clamp, and remove the indicator light wire sub-assembly from the upper position indicator housing.


Hide 35975 6.REMOVE POSITION INDICATOR SLIDE COVER

a.
C239462

Remove the position indicator slide cover from the upper position indicator housing.


Hide 35976 7.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

a.
C239463

Remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 8.REMOVE UPPER POSITION INDICATOR HOUSING

a.
C239464

Disengage the 4 claws and remove the position indicator lens.