Home › Drivetrain › U660E AUTOMATIC TRANSMISSION / TRANSAXLE › DIFFERENTIAL CASE › 2012.02–2014.05
RM2030EQ _52 Drivetrain _014643 U660E AUTOMATIC TRANSMISSION / TRANSAXLE _0074476 DIFFERENTIAL CASE A

U660E AUTOMATIC TRANSMISSION / TRANSAXLE  DIFFERENTIAL CASE  DISASSEMBLY  


PROCEDURE

Hide 41221 1.REMOVE FRONT DIFFERENTIAL RING GEAR

a.
C138531
0.518,1.152 0.677,1.319 0.159,0.168 10 *a 1.269,1.448 1.269,1.254 1.269,1.254 0.716,1.254 false 1.182,1.506 1.182,1.254 false
*a Matchmark


Put matchmarks on the front differential ring gear and differential case.


b.
C138532

Remove the 12 bolts.


c.
C138533

Using a plastic hammer, tap on the front differential ring gear to remove it from the differential case.


Hide 41311E 2.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

a.
C196809
1.021,0.688 0.823,0.875 0.823,0.875 0.938,1.104 false 0.823,0.875 1.396,1.281 false 2.75,0.875 2.625,0.875 2.625,0.875 2.667,1.01 false 0.469,0.802 0.781,0.969 0.313,0.167 10 false SST 2.25,0.75 2.698,0.969 0.448,0.219 10 true SST 2.771,0.167 2.958,0.333 0.188,0.167 10 false *a 0.344,0.323 0.531,0.49 0.188,0.167 10 false *b
*a Turn
*b Hold


Using SST, remove the front differential case front tapered roller bearing from the differential case.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00480)


b.
C196812
0.762,0.395 1.091,0.568 0.329,0.173 10 SST 1.135,0.481 1.407,0.481 false 1.577,1.015 1.884,1.179 0.307,0.164 10 SST 1.942,1.098 2.413,1.098 false

Using SST, remove the front differential case front tapered roller bearing outer race and shim from the transaxle housing.

SST
09308-00010  


Hide 41311F 3.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

a.
C196813
2.942,0.285 3.269,0.456 0.327,0.171 10 SST 2.273,0.632 2.909,0.4 2.909,0.4 2.857,0.727 false 1.627,0.986 1.954,1.157 0.327,0.171 10 SST 1.495,1.062 1.617,1.062 1.617,1.062 1.524,1.369 false 1.617,1.062 1.235,1.366 false 1.82,0.253 1.994,0.424 0.174,0.171 10 *a 0.231,0.591 0.405,0.762 0.174,0.171 10 *b
*a Turn
*b Hold


Using SST, remove the front differential case rear tapered roller bearing from the differential case.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00480)


b.
C196814
0.594,0.448 0.76,0.448 false 2.833,1.229 2.833,1.448 false 0.25,0.365 0.573,0.552 0.323,0.188 10 false SST 2.719,1.49 3.094,1.74 0.375,0.25 10 false SST

Using SST, remove the front differential case rear tapered roller bearing outer race from the transaxle case sub-assembly.

SST
09308-00010  


Hide 41342A 4.REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

a.
C138710

Using a pin punch (3 mm) and hammer, remove the straight pin.

HINT:

Before removing the straight pin, unstake it with a pin punch.



Hide 41342F 5.REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

a.
C138706

Remove the front No. 1 differential pinion shaft from the differential case.


Hide 41331Q 6.REMOVE DIFFERENTIAL SIDE GEAR

a.
C138528

Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 differential side gears and 2 No. 1 front differential side gear thrust washers from the differential case.


Hide 31105D 7.REMOVE FRONT TRANSAXLE CASE OIL SEAL

a.
C196817
0.708,0.365 0.781,0.365 false 2.188,0.948 2.354,0.948 false 0.375,0.26 0.688,0.427 0.313,0.167 10 false SST 2.375,0.865 2.688,1.031 0.313,0.167 10 false SST

Using SST, remove the front transaxle case oil seal from the transaxle housing.

SST
09308-00010  


Hide 31105H 8.REMOVE TRANSAXLE CASE OIL SEAL

a.
C196822
0.719,0.479 0.865,0.479 false 1.906,0.875 2.063,0.875 false 0.354,0.396 0.677,0.563 0.323,0.167 10 false SST 1.573,0.792 1.896,0.958 0.323,0.167 10 false SST

Using SST, remove the transaxle case oil seal from the transaxle case sub-assembly.

SST
09308-00010