Home › Suspension › REAR SUSPENSION › REAR STABILIZER BAR
RM2030EQ _53 Suspension _014648 REAR SUSPENSION _0074500 REAR STABILIZER BAR A

REAR SUSPENSION  REAR STABILIZER BAR  INSTALLATION  


PROCEDURE

Hide 48818 1.INSTALL REAR STABILIZER BUSHING

a.
C276195
0.51,1.802 0.51,1.323 false 2.344,1.271 2.188,1 2.188,1 1.958,1 false 0.438,1.813 0.75,2.01 0.313,0.198 10 false *a 1.792,0.917 2.104,1.146 0.313,0.229 10 false *b
*a Stopper Ring
*b Cutout
V100135

Rear of the Vehicle
V100136

Outside of the Vehicle


Install the 2 rear stabilizer bushings to the outside of the stopper ring on the rear stabilizer bar as shown in the illustration.

NOTICE:

Install the rear stabilizer bushing so that the cutouts face rearward.



Hide 48832A 2.INSTALL REAR NO. 1 STABILIZER BAR BRACKET

a.

Install the 2 rear No. 1 stabilizer bar brackets.


Hide 48812 3.INSTALL REAR STABILIZER BAR

a.
C253273
3.167,0.146 3.135,0.135 false
V100136

Front of the Vehicle


Install the rear stabilizer bar with the 4 bolts.

Torque:
31 N*m (316 kgf*cm, 23 ft.*lbf)


Hide 48840A 4.INSTALL REAR STABILIZER LINK ASSEMBLY LH

a.

Install the rear stabilizer link assembly LH to the rear shock absorber assembly with the nut.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.


b.

Install the rear stabilizer link assembly LH to the rear stabilizer bar with the nut.

Torque:
39 N*m (400 kgf*cm, 29 ft.*lbf)

If the ball joint turns together with the nut, use a hexagon wrench to hold the stud.


Hide 48830D 5.INSTALL REAR STABILIZER LINK ASSEMBLY RH

HINT:

Perform the same procedure as for the LH side.


Hide 6.INSTALL REAR WHEELS

Torque:
103 N*m (1049 kgf*cm, 76 ft.*lbf)