Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE LINE
RM2030EQ _54 Brake _014651 BRAKE SYSTEM (OTHER) _0074510 BRAKE LINE L

BRAKE SYSTEM (OTHER)  BRAKE LINE  PRECAUTION  


TROUBLESHOOTING PRECAUTION



NOTICE:
·

Since the brake lines are critical safety related parts, be sure to disassemble and inspect the components if a brake fluid leak is found. If any abnormality is found, replace the component with a new one.

·

When removing brake components, cover the brake line connections to prevent foreign matter such as dust or dirt from entering the lines.

·

Do not damage or deform the brake lines during the removal and installation procedures.

·

When installing a grommet to the vehicle body, ensure that the brake line passes through the center of the grommet.

·

When installing a brake line or flexible hose, ensure that they are free from twists or kinks.

·

If the metal end of a flexible hose does not match the groove on the bracket, twist the hose slightly to insert it.

·

Flexible hoses must be free from shock absorber oil, grease, etc.

·

When installing a brake line to a plastic clamp, ensure that the brake line is not loose or pinched.

·

Do not reuse any clips or plastic clamps removed from a flexible hose.

·

After installing a brake line or flexible hose, ensure that they do not interfere with any other components or vehicle body.

·

Do not allow brake fluid on any painted vehicle body surface. If brake fluid leaks onto any painted surface, immediately wash it off.

·
C102779
0.958,1.406 0.958,1.781 false 1.74,0.896 1.615,0.667 1.615,0.667 0.979,0.667 false 2.198,3.479 2.198,4.042 false 3,3.063 3,3.521 false 0.073,0.073 0.406,0.323 0.333,0.25 12 *A 0.115,2.427 0.51,2.698 0.396,0.271 12 *B 0.885,1.781 1.302,2.073 0.417,0.292 10 *a 0.813,0.583 1.25,0.906 0.438,0.323 10 *b 2.135,4.042 2.635,4.333 0.5,0.292 10 *a 2.927,3.521 3.281,3.854 0.354,0.333 10 *b
*A Disconnecting
*B Connecting
*a Hold
*b Turn


When disconnecting and connecting a flexible hose and brake line:

1.

Hold the flexible hose with a wrench and disconnect the brake line using a union nut wrench without deforming the line.

2.

Remove the clip and disconnect the flexible hose.

3.

Secure the flexible hose with a new clip. At this time, be sure to securely install the clip.

4.

Connect the brake line using a union nut wrench without deforming the line.


·
C238442
0.99,0.938 0.792,0.604 0.792,0.604 0.677,0.604 false 2.146,0.646 2.146,0.875 false 1.781,2.052 1.521,1.771 1.521,1.771 1.292,1.771 false 0.49,0.51 1.021,0.844 0.531,0.333 10 *a 1.125,1.698 1.771,2 0.646,0.302 10 *1 2.073,0.875 2.479,1.188 0.406,0.313 10 *b
*1 Way
*a Hold
*b Turn


When connecting a brake line and way:

1.

Support the way to prevent deformation of the brake line and connect the brake line to the way with a union nut wrench.

2.

Support the way to prevent deformation of the brake line and install the bolt to secure the way to the vehicle body.