Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for RHD)
RM2030EQ _54 Brake _014651 BRAKE SYSTEM (OTHER) _0074515 BRAKE MASTER CYLINDER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for RHD)  DISASSEMBLY  


PROCEDURE

Hide 47230 1.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

Hide 47299 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER

Hide 47210U 3.REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN

a.
C239883

Mount the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.

Using a pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir sub-assembly.



Hide 47202 4.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder assembly.


Hide 47255 5.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.

Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir sub-assembly.