Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER(for RHD)
RM2030EQ _54 Brake _014651 BRAKE SYSTEM (OTHER) _0074515 BRAKE MASTER CYLINDER(for RHD) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(for RHD)  REASSEMBLY  


PROCEDURE

Hide 47255 1.INSTALL MASTER CYLINDER RESERVOIR GROMMET

a.

Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.


b.

Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir sub-assembly.


Hide 47202 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Install the brake master cylinder reservoir sub-assembly to the brake master cylinder assembly.


Hide 47210U 3.INSTALL BRAKE MASTER CYLINDER STRAIGHT PIN

a.

Mount the brake master cylinder sub-assembly in a vise.

NOTICE:
·

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.

·

Do not drop the brake master cylinder reservoir sub-assembly.




b.
C239883

Using a pin punch and a hammer, tap in the brake master cylinder straight pin to secure the brake master cylinder reservoir sub-assembly.


Hide 47299 4.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

Hide 47230 5.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY