Home › Audio / Visual / Telematics › AUDIO / VIDEO › WINDOW GLASS ANTENNA WIRE
RM2030EQ _56 Audio / Visual / Telematics _014658 AUDIO / VIDEO _0074545 WINDOW GLASS ANTENNA WIRE G

AUDIO / VIDEO  WINDOW GLASS ANTENNA WIRE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT WINDOW GLASS ANTENNA WIRE

a.
E111994
0.531,0.802 0.958,1.104 false 0.969,1.625 1.042,1.958 false 2.188,1.375 2.271,1.708 false 0.354,0.698 0.646,0.906 0.292,0.208 10 *a 0.948,1.969 1.229,2.208 0.281,0.24 10 *b 2.177,1.74 2.458,1.938 0.281,0.198 10 *c
*a Tester Probe
*b Antenna Wire
*c Tin Foil


Check for continuity of the antenna.

HINT:

Check for continuity at the center of each antenna wire as shown in the illustration.


NOTICE:
·

When cleaning the glass, wipe it in the direction of the wire with a soft dry cloth. Take care not to damage the wire. Do not use detergents or glass cleaners with abrasive ingredients.

·

When measuring the resistance, wrap a piece of tin foil around the tip of the negative probe and press the foil against the wire with your finger, as shown in the illustration.



OK:

There is continuity in the antenna.


If the result is not as specified, repair the window glass antenna wire.