Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH
RM2030EQ _58 Vehicle Interior _014664 DOOR LOCK _0074580 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84820 1.INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY

a.

Check the operation of the power window regulator master switch assembly (for LHD)

i.
B279066
1.583,3.219 1.583,2.552 1.583,2.552 1.771,2.552 false 1.448,3.219 1.448,2.24 1.448,2.24 1.771,2.24 false 0.479,3.219 0.479,2.24 0.479,2.24 0.604,2.24 false 1.792,2.469 2.115,2.719 0.323,0.25 10 false E 1.802,2.167 2.167,2.406 0.365,0.24 10 false L 0.625,2.177 0.948,2.448 0.323,0.271 10 false UL 0.104,0.094 0.417,0.385 0.313,0.292 10 false *a
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (L) - 1 (E) Lock switch pushed Below 1 Ω
2 (L) - 1 (E) off 10 kΩ or higher
9 (UL) - 1 (E) Unlock switch pushed Below 1 Ω
9 (UL) - 1 (E) off 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.



b.

Check the operation of the power window regulator master switch assembly (for RHD)

i.
B295736
0.469,3.208 0.469,1.948 0.469,1.948 0.792,1.948 false 0.604,3.219 0.604,2.469 0.604,2.469 0.781,2.469 false 1.438,3.219 1.438,2.469 1.438,2.469 1.677,2.469 false 0.146,0.115 0.51,0.417 0.365,0.302 10 false *a 0.823,2.406 1.083,2.594 0.26,0.188 10 false UL 0.833,1.844 1.042,2.042 0.208,0.198 10 false E 1.719,2.365 2.01,2.604 0.292,0.24 10 false L
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 (L) - 9 (E) Lock switch pushed Below 1 Ω
2 (L) - 9 (E) off 10 kΩ or higher
8 (UL) - 9 (E) Unlock switch pushed Below 1 Ω
8 (UL) - 9 (E) off 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.