Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH › 2012.02–2015.04
RM2030EQ _58 Vehicle Interior _014664 DOOR LOCK _0074581 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH ASSEMBLY

B203483
0.063,0.052 0.469,0.323 0.406,0.271 10 false *a
*a Component without harness connected
(Unlock Warning Switch Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Switch free (Key removed) 10 kΩ or higher
1 - 2 Switch pushed (Key set) Below 1 Ω


If the result is not as specified, replace the unlock warning switch assembly.