Home › Vehicle Interior › DOOR LOCK › LUGGAGE COMPARTMENT DOOR LOCK
RM2030EQ _58 Vehicle Interior _014664 DOOR LOCK _0074584 LUGGAGE COMPARTMENT DOOR LOCK G

DOOR LOCK  LUGGAGE COMPARTMENT DOOR LOCK  INSPECTION  


PROCEDURE

Hide 64610 1.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

a.

Check the operation of the door lock motor.

i.
B285028
2.74,1.5 2.74,1.792 2.74,1.792 2.667,1.792 false 2.875,1.5 2.875,1.792 2.875,1.792 2.958,1.792 false 0.708,0.521 0.969,0.771 0.26,0.25 10 false *b 0.094,0.073 0.385,0.375 0.292,0.302 10 false *a 2.125,0.51 2.375,0.76 0.25,0.25 10 false *c 2.542,1.708 2.781,1.979 0.24,0.271 10 false E 3,1.698 3.26,1.948 0.26,0.25 10 false B
*a Component without harness connected
(Luggage Compartment Door Lock Assembly)
*b Close (Lock)
*c Open (Unlock)


Move the door lock to the close (lock) position.


ii.

Apply battery voltage to the door lock motor and check operation of the door lock motor.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 1 (B)
Battery negative (-) → 2 (E)
Luggage compartment door lock motor open (unlock) operation


If the result is not as specified, replace the luggage compartment door lock assembly.



b.

Check the operation of the door courtesy switch.

i.
B285028
2.635,1.49 2.635,1.781 2.635,1.781 2.563,1.781 false 2.75,1.49 2.75,1.781 2.75,1.781 2.823,1.781 false 0.688,0.51 0.948,0.75 0.26,0.24 10 false *b 0.094,0.073 0.354,0.323 0.26,0.25 10 false *a 2.125,0.51 2.354,0.729 0.229,0.219 10 false *c 2.323,1.698 2.635,1.938 0.313,0.24 10 false D+ 2.854,1.698 3.094,1.927 0.24,0.229 10 false E
*a Component without harness connected
(Luggage Compartment Door Lock Assembly)
*b Close (Lock)
*c Open (Unlock)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Measurement Condition Door Lock Condition Specified Condition
2 (E) - 3 (D+) Close (Lock) 10 kΩ or higher
2 (E) - 3 (D+) Open (Unlock) Below 1 Ω


If the result is not as specified, replace the luggage compartment door lock assembly.