Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System)
RM2030EQ _58 Vehicle Interior _014664 DOOR LOCK _0074588 WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System) D

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Smart Entry and Start System)  DIAGNOSIS SYSTEM  


DESCRIPTION


The ECU stores trouble codes when malfunctions occur.

The diagnostic system allows for reading of the trouble codes from the DLC3.

Use the intelligent tester to help diagnose and repair the problem.



INSPECT BATTERY VOLTAGE


a.

Measure the vehicle battery voltage.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the vehicle battery.



SELF-DIAGNOSTIC MODE (USING INTELLIGENT TESTER)


a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG).


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Main Body / Utility / Wireless Door Lock Diagnosis Mode.

Body Electrical > Main Body > Utility
Tester Display
Wireless Door Lock Diagnosis Mode
50005 123 2164

e.

Proceed to the next step in accordance with the prompts on the intelligent tester screen.

HINT:

The electrical key transmitter sub-assembly uses 2 different frequencies alternately for communication. When in self diagnostic mode, one of the channels can be selected or the channels can be automatically switched.



f.
B220865
0.115,0.031 2.385,0.323 2.271,0.292 10 Wireless Door Lock Buzzer Output: 0.625,1.385 0.854,1.531 0.229,0.146 10 ON 0.573,1.708 0.875,1.854 0.302,0.146 10 OFF 1.531,2.167 1.729,2.344 0.198,0.177 10 T1 2.146,2.167 2.344,2.344 0.198,0.177 10 T2 1.969,2.583 3.198,2.813 1.229,0.229 10 T1: 0.125 seconds 1.969,2.896 3.083,3.104 1.115,0.208 10 T2: 0.5 seconds 1.802,2.167 2,2.344 0.198,0.177 10 T1

Check that the system has switched to self-diagnostic mode by checking the wireless door lock buzzer output pattern.


g.

Check the diagnostic outputs when the electrical key transmitter sub-assembly switch is held down. The diagnostic outputs can be checked by the interior light and wireless door lock buzzer patterns.

B163380
0.115,0.073 2.563,0.448 2.448,0.375 10 false Wireless Door Lock Buzzer Output: 0.292,1.344 2.865,1.594 2.573,0.25 10 false (Lock / Unlock / Luggage Open Switch): 0.51,1.969 0.75,2.146 0.24,0.177 10 false ON 0.448,2.375 0.75,2.552 0.302,0.177 10 false OFF 4.125,0.573 6.323,0.75 2.198,0.177 10 false Unmatching Recognition Code (B): 4.271,1.146 4.51,1.323 0.24,0.177 10 false ON 4.208,1.542 4.51,1.719 0.302,0.177 10 false OFF 4.125,2.938 5.76,3.115 1.635,0.177 10 false No Diagnostic Output (C): 4.177,3.375 4.479,3.552 0.302,0.177 10 false OFF 1.25,2.813 1.458,2.979 0.208,0.167 10 false T1 1.76,2.813 1.969,2.979 0.208,0.167 10 false T2 4.938,2.042 6.417,2.229 1.479,0.188 10 false Wave is being received 0.583,3.063 3.594,3.281 3.01,0.219 10 false T1: 0.125 seconds (Wireless Door Lock Buzzer) 0.583,3.417 3.802,3.698 3.219,0.281 10 false T2: 0.25 seconds (Wireless Door Lock Buzzer) 0.292,1.042 1.385,1.188 1.094,0.146 10 false Normal Wave (A) 1.406,1.042 1.573,1.198 0.167,0.156 10 false *1 3.823,3.75 6.854,4.333 3.031,0.583 10 false *1: When either "CH1 Fixed" or "CH2 Fixed" is selected, the buzzer sounds only when it detects a frequency that matches the selected frequency

Result
Wireless Door Lock Buzzer Output Suspected Area
A Normal (No malfunction)
B Register wireless code
C Wave interference or malfunction of a related component