Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT › 2012.02–2015.04
RM2030EQ _58 Vehicle Interior _014666 LIGHTING (INT) _0074607 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 89783 1.INSPECT TRANSPONDER KEY AMPLIFIER

a.
E211914C06
0.179,0.159 0.331,0.312 0.153,0.153 10 *a 0.866,1.843 1.132,1.996 0.266,0.153 10 ILL- 1.371,1.244 1.034,1.824 false 2.267,1.843 2.567,1.996 0.3,0.153 10 ILL+ 2.069,1.244 2.406,1.824 false
*a Component without harness connected
(Transponder Key Amplifier)


Connect the (+) lead from the battery to terminal 2 (ILL+) and the (-) lead to terminal 6 (ILL-).


b.

Check that the ignition key cylinder light comes on.

OK:

The light comes on.


If the result is not as specified, replace the transponder key amplifier.