Home › Vehicle Interior › LIGHTING (INT) › RELAY
RM2030EQ _58 Vehicle Interior _014666 LIGHTING (INT) _0074613 RELAY G

LIGHTING (INT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84270Q 1.INSPECT LIGHT CUT RELAY

a.
E222294
1.109,0.938 1.299,0.485 1.299,0.485 1.437,0.485 false 1.059,1.337 1.144,1.754 1.144,1.754 1.339,1.754 false 0.82,0.977 0.938,0.486 0.938,0.486 1.067,0.486 false 0.559,1.279 0.635,1.756 0.635,1.756 0.818,1.756 false 1.457,0.407 1.56,0.563 0.103,0.156 10 1 1.375,1.671 1.478,1.827 0.103,0.156 10 2 1.092,0.399 1.195,0.555 0.103,0.156 10 5 0.842,1.662 0.945,1.818 0.103,0.156 10 3

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the light cut relay.