Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2012.02–2015.04
RM2030EQ _58 Vehicle Interior _014667 METER / GAUGE / DISPLAY _0074615 METER / GAUGE SYSTEM D

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever a meter DTC is detected, the meter ECU stores the current vehicle state as Freeze Frame Data.



CHECK FREEZE FRAME DATA


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the intelligent tester on.


d.

Enter the following menus: Body / Combination Meter / DTC.


e.

According to the intelligent tester display, select the trouble code data display with Freeze Frame Data.


f.

Read the Freeze Frame Data recorded when the DTC was set.

Combination Meter
Tester Display Condition Displayed Item
U0100 Lost Communication with ECM/PCM "A"
·

TRIP

·

Elapsed time after ignition switch ON


U0129 Lost Communication with Brake System Control Module
·

TRIP

·

Elapsed time after ignition switch ON


U0131 Lost Communication with Power Steering Control
·

TRIP

·

Elapsed time after ignition switch ON


U0142 Lost Communication with Body Control Module "B"
·

TRIP

·

Elapsed time after ignition switch ON


U0151 Lost Communication with Restraints Control Module
·

TRIP

·

Elapsed time after ignition switch ON





CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTC will also clear the Freeze Frame Data.


a.

Connect the intelligent tester to the DLC3.


b.

Turn the ignition switch to ON.


c.

Clear DTCs and Freeze Frame Data (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DTC CHECK / CLEAR).

Body Electrical > Combination Meter > Clear DTCs
50002 122