Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM
RM2030EQ _58 Vehicle Interior _014669 SUPPLEMENTAL RESTRAINT SYSTEMS _0074620 AIRBAG SYSTEM D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

Deceleration sensors used for the airbag system are installed on various parts on the vehicle and calculate the deceleration rate of each part during a collision.


b.

Depending on the situation, the airbag sensor assembly sends a deployment signal to each airbag and pretensioner based on the information from each sensor.



DEPLOYMENT CONDITION


a.

FRONTAL COLLISION

C240619
0.177,3.51 2.135,3.677 1.958,0.167 10 false *: for RHD 0.323,1.135 1.896,1.323 1.573,0.188 10 false Airbag Sensor Assembly 0.427,2.458 1.771,2.667 1.344,0.208 10 false Front Airbag Sensors 2.625,1.823 2.969,2.031 0.344,0.208 10 false AND 4.115,0.49 6.74,0.688 2.625,0.198 10 false Horn Button Assembly (Driver Side Squib) 3.99,1.115 6.865,1.469 2.875,0.354 10 false Instrument Panel Passenger Airbag Assembly (Front Passenger Side Squib) 3.948,2.01 6.906,2.354 2.958,0.344 10 false Lower No. 1 Instrument Panel Airbag Assembly (Driver Side Knee Airbag Squib)* 4.208,2.896 6.656,3.25 2.448,0.354 10 false Front Seat Outer Belt Assembly LH/RH (Front Pretensioner Squib LH/RH)

i.

Frontal collision signals are produced based on the information from the airbag sensor assembly and front airbag sensors.

HINT:

In case of a frontal collision, the SRS ignition signal may be output after receiving an ON signal from the deceleration sensor built in the airbag sensor assembly even without a signal from the front airbag sensors.



ii.

Frontal collision signals are used to deploy the airbags and pretensioners in the illustration.



b.

SIDE COLLISION (Pattern 1)

C247159
4.573,0.229 6.344,0.563 1.771,0.333 10 false Front Seat Airbag Assembly (Side Squib) 4.458,1.573 6.458,1.906 2,0.333 10 false Curtain Shield Airbag Assembly (Curtain Shield Squib) 4.438,2.906 6.469,3.521 2.031,0.615 10 false Front Seat Outer Belt Assembly (Front Pretensioner Squib)* 0.458,0.938 1.719,1.281 1.26,0.344 10 false Side Airbag Sensor Assembly 0.333,2.448 1.969,2.656 1.635,0.208 10 false Airbag Sensor Assembly 2.625,1.802 2.938,1.99 0.313,0.188 10 false AND 0.167,3.458 0.854,3.635 0.688,0.177 10 false *: for LHD

i.

Side collision (Pattern 1) signals are produced based on the information from the airbag sensor assembly and side airbag sensor assembly.


ii.

Side collision (Pattern 1) signals are used to deploy the airbags and pretensioner in the illustration.



c.

SIDE COLLISION (Pattern 2)

C247160
4.74,1.073 6.74,1.406 2,0.333 10 false Curtain Shield Airbag Assembly (Curtain Shield Squib) 0.177,0.604 2.427,0.802 2.25,0.198 10 false Side No. 2 Airbag Sensor Assembly 0.531,1.917 2.156,2.125 1.625,0.208 10 false Airbag Sensor Assembly 3.51,1.313 3.823,1.5 0.313,0.188 10 false AND

i.

Side collision (Pattern 2) signals are produced based on the information from the airbag sensor assembly and side No. 2 airbag sensor assembly.


ii.

Side collision (Pattern 2) signals are used to deploy the airbag in the illustration.