73230
1.REMOVE FRONT SEAT INNER BELT ASSEMBLY
for LHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY(for LHD)>REMOVAL
for RHD: Click hereVehicle Interior>SEAT BELT>FRONT SEAT INNER BELT ASSEMBLY(for RHD)>REMOVAL
71848A
2.REMOVE SEAT ADJUSTER COVER CAP
Remove the 2 seat adjuster cover caps.
72525A
3.REMOVE RECLINING ADJUSTER RELEASE HANDLE
| *1 | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
71073S
4.DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Disconnect the rubber band of the separate type front seatback cover.
71811D
5.REMOVE FRONT SEAT CUSHION SHIELD
Remove the screw.
Disengage the 5 claws, 7 guides and clip to remove the front seat cushion shield.
71861
6.REMOVE FRONT SEAT INNER CUSHION SHIELD
Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.
7.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Disengage the fastener and separate the front seat airbag assembly wire harness.
for RHD:
Disengage the clamp to remove the connector as shown in the illustration.
Disengage the hook.
Disengage each hook and remove the separate type front seat cushion cover with pad.
71071S
8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Remove the 2 hog rings.
Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.
9.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Remove the 5 hog rings.
Open the 2 fasteners.
Remove the 3 hog rings.
Disengage the 4 claws and remove the 2 front seat headrest supports.
Remove the 2 nuts and the 3 brackets.
Remove the separate type front seatback cover with pad.
73910A
10.REMOVE FRONT SEAT AIRBAG ASSEMBLY
71073S
11.REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.
71876F
12.REMOVE RECLINING ADJUSTER INSIDE COVER LH
Disengage the guide and remove the reclining adjuster inside cover LH.
71875F
13.REMOVE RECLINING ADJUSTER INSIDE COVER RH
Disengage the guide and remove the reclining adjuster inside cover RH.
71538A
14.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector LH.
71537G
15.REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH
Remove the screw.
Disengage the 3 claws to remove the front seat cushion edge protector RH.
71630S
16.REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY
Remove the 4 bolts.
Disengage the 4 guides to remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.
71587B
17.REMOVE FRONT SEATBACK EDGE PROTECTOR
Disengage each claw to remove the 2 front seatback edge protectors from the front seatback frame sub-assembly.
71053S
18.REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY
Disengage the 4 claws.
Disengage the 2 guides to remove the front seatback spring sub-assembly from the front seatback frame sub-assembly.
Remove the 2 front seatback hooks from the front seatback spring sub-assembly.
72211
19.REMOVE SEAT TRACK ADJUSTING HANDLE
Disengage the 2 springs to remove the seat track adjusting handle from the separate type front seat cushion spring assembly.