Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat)
RM2030EQ _58 Vehicle Interior _014670 SEAT _0074632 FRONT SEAT ASSEMBLY(for Power Seat) G

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 71610S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY (w/ Memory)

a.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Slide Motor (Separate Type Front Seat Cushion Spring Assembly))


Check the operation of the slide motor.

i.

Check if the seat cushion spring moves smoothly when the battery is connected to the slide motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seat cushion spring moves forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seat cushion spring moves backward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



b.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Lifter Motor (Separate Type Front Seat Cushion Spring Assembly))


Check the operation of the lifter motor.

i.

Check if the seat cushion spring moves smoothly when the battery is connected to the lifter motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seat cushion spring moves upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seat cushion spring moves downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



c.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Front Vertical Motor (Separate Type Front Seat Cushion Spring Assembly))


Check the operation of front vertical motor.

i.

Check if the seat cushion spring moves smoothly when the battery is connected to the front vertical motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seat cushion spring moves upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seat cushion spring moves downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



Hide 71610S 2.INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY (w/o Memory)

a.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Slide Motor (Separate Type Front Seat Cushion Spring Assembly))


Check the operation of the slide motor.

i.

Check if the front seat cushion moves smoothly when the battery is connected to the slide motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seat cushion spring moves forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seat cushion spring moves backward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



b.
B161051
0.116,0.074 0.321,0.245 0.205,0.17 10 *a
*a Component without harness connected
(Lifter Motor (Separate Type Front Seat Cushion Spring Assembly))


Check the operation of the lifter motor. (for Driver)

i.

Check if the front seat cushion moves smoothly when the battery is connected to the lifter motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
Seat cushion spring moves upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Seat cushion spring moves downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



c.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Front Vertical Motor (Separate Type Front Seat Cushion Spring Assembly))


Check the operation of the front vertical motor. (for Driver)

i.

Check if the front seat cushion moves smoothly when the battery is connected to the front vertical motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seat cushion spring moves upward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seat cushion spring moves downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



Hide 71014S 3.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY (w/ Memory)

a.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly))


Check the operation of the reclining motor.

i.

Check if the seatback moves smoothly when the battery is connected to the reclining motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seatback moves forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seatback moves backward


If the result is not as specified, replace the front seatback frame sub-assembly.



Hide 71014S 4.INSPECT FRONT SEATBACK FRAME SUB-ASSEMBLY (w/o Memory)

a.
B238256
0.107,0.047 0.272,0.21 0.165,0.162 10 *a
*a Component without harness connected
(Reclining Motor (Front Seatback Frame Sub-assembly))


Check the operation of the reclining motor.

i.

Check if the front seatback moves smoothly when the battery is connected to the reclining motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → Terminal 4
Battery negative (-) → Terminal 1
Seatback moves forward
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 4
Seatback moves backward


If the result is not as specified, replace the front seatback frame sub-assembly.