72750D
1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY (FOR DRIVER)
| *a | Component without harness connected
(Lumbar Support Adjuster Assembly (for Driver)) |
Check the operation of the lumbar support adjuster assembly (for Driver).
Check that the front seatback moves smoothly when the battery is connected to the lumbar support adjuster assembly (for Driver) connector terminals.
| Measurement Condition | Operational Direction |
|---|---|
| Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2 |
Seatback moves forward |
| Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 |
Seatback moves backward |
If the result is not as specified, replace the lumbar support adjuster assembly (for Driver).