1.REMOVE REAR SEAT CUSHION ASSEMBLY
Disengage the hook of the rear seat cushion assembly from the vehicle body as shown in the illustration.
| a | 100 mm (3.94 in.) or less |
Follow the instructions below carefully as the cushion frame can be deformed easily.
Choose a hook to disengage first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to disengage the hook.
Repeat the step above for the other hook.
Remove the rear seat cushion assembly.
Be careful not to damage the vehicle body.
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
Disengage the claw and remove the rear seat cushion lock hook.
Rear seat cushion lock hooks must not be reused.
The illustration is for the RH side. The LH side is the opposite of the RH side.
3.REMOVE REAR SIDE SEATBACK ASSEMBLY LH
Disconnect the rear seat outer belt from the rear seat shoulder belt guide LH.
Remove the bolt.
Disengage the hook and remove the rear side seatback assembly LH.
Be careful not to damage the vehicle body.
4.REMOVE REAR SIDE SEATBACK ASSEMBLY RH
Disconnect the rear seat outer belt from the rear seat shoulder belt guide RH.
Remove the bolt.
Disengage the hook and remove the rear side seatback assembly RH.
Be careful not to damage the vehicle body.
5.REMOVE REAR SEATBACK ASSEMBLY LH
Disconnect the rear seat inner with center belt assembly LH from the rear seat center shoulder belt guide.
Fold down the rear seatback assembly LH.
| *1 | Fastener |
Disengage the fastener as shown in the illustration.
Remove the 2 bolts and rear seatback assembly LH.
Be careful not to damage the vehicle body.
6.REMOVE REAR SEATBACK ASSEMBLY RH
Fold down the rear seatback assembly RH.
| *1 | Fastener |
Disengage the fastener as shown in the illustration.
Remove the 2 bolts and rear seatback assembly RH.
Be careful not to damage the vehicle body.