Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY
RM2030EQ _58 Vehicle Interior _014670 SEAT _0074640 REAR SEAT ASSEMBLY A

SEAT  REAR SEAT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 71075B 1.INSTALL BENCH TYPE REAR SEAT CUSHION COVER

a.

Temporarily install the bench type rear seat cushion cover to the bench type rear seat cushion pad.


b.

Using hog ring pliers, install 24 new hog rings.

B281585

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




c.

Using hog ring pliers, install the bench type rear seat cushion cover to the bench type rear seat cushion pad with 41 new hog rings.

B298655

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 71078S 2.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for LH Side)

a.
B292159

Using hog ring pliers, install the separate type rear seatback cover with 8 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 3.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

a.

Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly LH.


b.
B281564

Engage the 2 hooks.


c.
B281563

Using hog ring pliers, install 6 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




d.
B292157

Engage the 2 hooks to install the separate type rear seatback cover with pad.


Hide 72667 4.INSTALL REAR SEATBACK UPPER LOCK BEZEL (for LH Side)

a.
B281560

Engage the 4 claws to install the rear seatback upper lock bezel.


Hide 73345 5.INSTALL REAR SEAT CENTER SHOULDER BELT GUIDE

a.
B294050

Engage the guide.


b.

Install the rear seat center shoulder belt guide to the rear seatback assembly LH with the 2 screws.


Hide 71077S 6.INSTALL SEPARATE TYPE REAR SEATBACK COVER (for RH Side)

a.
B293551

Using hog ring pliers, install the separate type rear seatback cover to the separate type rear seatback pad with 10 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B298659

Using hog ring pliers, install 7 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 7.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

a.

Temporarily install the separate type rear seatback cover with pad to the rear seatback frame sub-assembly RH.


b.
B281626

Engage the 2 hooks.


c.
B281576

Using hog ring pliers, install 7 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




d.
B292160

Engage the 2 hooks to install the separate type rear seatback cover with pad.


Hide 72667 8.INSTALL REAR SEATBACK UPPER LOCK BEZEL (for RH Side)

a.
B281573

Engage the 4 claws to install the rear seatback upper lock bezel.


Hide 72806B 9.INSTALL REAR CENTER SEAT ARMREST CUP HOLDER SUB-ASSEMBLY

a.
B294189

Engage the 2 claws and 2 guides to install the rear center seat armrest cup holder sub-assembly.


Hide 71349C 10.INSTALL REAR SEATBACK HINGE COVER

a.
B281572

Install the rear seatback hinge cover as shown in the illustration.


Hide 72830 11.INSTALL REAR CENTER SEAT ARMREST ASSEMBLY

a.
B281570

Engage the 2 claws to install the bush.


b.
B281569

Engage the guide.


c.

Install the rear center seat armrest assembly with the bolt and washer.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


Hide 72848A 12.INSTALL NO. 1 SEAT ARMREST COVER

a.
B281568

Engage the 3 claws to install the No. 1 seat armrest cover.


Hide 73344 13.INSTALL REAR SEAT SHOULDER BELT GUIDE LH

a.
B280243

Engage the guide.


b.

Install the rear seat shoulder belt guide LH to the rear side seatback pad with frame LH with the 2 screws.


Hide 73343 14.INSTALL REAR SEAT SHOULDER BELT GUIDE RH

a.
B280248

Engage the guide.


b.

Install the rear seat shoulder belt guide RH to the rear side seatback pad with frame RH with the 2 screws.