Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for LHD) › 2012.02–2013.07
RM2030EQ _58 Vehicle Interior _014671 SEAT BELT _0074644 FRONT SEAT INNER BELT ASSEMBLY(for LHD) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for LHD)  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver)

a.
B271232
0.208,0.167 0.542,0.427 0.333,0.26 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Driver))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Driver seat belt unfastened Below 1 Ω
2 - 3 Driver seat belt fastened 10 kΩ or higher


If the result is not as specified, replace the front seat inner belt assembly (for driver).